close
Learn to Softmod a PS3!
minimize

Setting up the PS3 and Webserver:

  1. On the root of your USB then create a folder called PS3 then inside that folder one called UPDATE
    then throw PS3UPDAT482US.PUP inside that folder and rename it to PS3UPDAT.PUP
  2. Install the 4.82 OFW by going to Settings then Update then by usb storage media
  3. After the update is finished connect the ps3 to your computer via the ethernet cables
  4. On your ps3 manually set the IP address to the same network as your computer
  5. Extract the nand nor writer zip and in the nor nand writer release folder create a folder called htdocs
  6. rename nand-482.html or nor-482.html to index.html (depending on your ps3 flash type)
    and move it along with xp_rel_writer10.js to the htdocs folder
  7. run miniweb.exe
  8. take note of the local ip address and port number miniweb.exe shows
  9. the webserver is now set up


close
Running the Exploit
minimize

How to run the exploit

  1. copy flsh.hex to the root of your usb flash drive
  2. put the usb stick in the right most slot of the ps3
  3. go to your web browser
  4. set your homepage to a blank page: about:blank
  5. close and open your web browser again and browse to your computers ip address
  6. Click write to NAND Flash Memory, wait for 3 beeps and your ps3 to shut down
  7. Next unplug your usb copy the rebug 4.82 lite CFW and then install it the way you installed the 4.82 OFW